Auto Parts

I have a full set of 356b brakes front rear with all hardware. I was saving them for my barndoor build, but going a different direction with it. These are in great shape. Just need a little cleaning and put in to use. The rear drums were clearance jut a bit on the edge of the fins for an aftermarket wheel. These were pulled off in the 60's and sat in a workshop until I bought them in the 90's a...

I posted this up for sale a couple years ago then decided to keep it, but doing a different direction with my bus build. This is an original datsun flat empi gt steering wheel with original horn button in great shape for these(not the same as bug empi wheels). The wood is beautiful. Some DA in the past cut the mounting hub off of it and tried to adapt it to another make car. Any competent machi...

Both have all good mounting studs. Upright needs rechromed. Both from a 1964 $35 shipped for both

Item posted in the Tires, Parts & Accessories category

Recently bought out a parts store that had tons of vw stuff. And had an nos case of these. Not made by vw but fit busses perfectly And fit behind the gas door. These are chromed steel and vented. Each come with two keys. $25 each shipped. Once these are gone thats it.

Item must be returned within: 14 Days Refund will be given as: Money back or exchange (buyer's choice) Return shipping will be paid by: Buyer Restocking Fee: No Return policy details: -Connected Auto offers exchanges only. Refunds are given if there is no replacement, or depending on the situation and must be approved by Seller within 14 days after purchase. -There will be a 25% restocking fee ...

Item must be returned within: 14 Days Refund will be given as: Money back or exchange (buyer's choice) Return shipping will be paid by: Buyer Restocking Fee: No Return policy details: -Connected Auto offers exchanges only. Refunds are given if there is no replacement, or depending on the situation and must be approved by Seller within 14 days after purchase. -There will be a 25% restocking fee ...

Item must be returned within: 14 Days Refund will be given as: Money back or exchange (buyer's choice) Return shipping will be paid by: Buyer Restocking Fee: No Return policy details: -Connected Auto offers exchanges only. Refunds are given if there is no replacement, or depending on the situation and must be approved by Seller within 14 days after purchase. -There will be a 25% restocking fee ...

406 sbc Race Motor for sale , 12.5:1 comp, low run time less than 25 passes down the track, Dart iron eagle platinum 215 heads , victor jr intake , custom 830 double pumper gas carb, new hei dist, steel crank , Manley 800hp I beam rods , electric water pump, sfi flexplate, solid flat tappet cam, roller rockers, engine runs easy consistent 6.20's in the 1/8 in a 130" steel tube chassis altered, ...

Keith Black,426 Hemi, big bore,Allen Johnson heads,with Kobelco Blower. This engine has all new parts and has never been ran.Engine built by Fowler Engines a well known Alcohol engine builder. Have alot of spare parts that go with engine.Over 35k invested in this engine.Have list of parts and machine work from Fowler Engines.. Donone. Springdale, AR 72764 4798561274 (479) 287-4738

" Racequip Single Layer Suit Two Piece SFI 3.2A/1 Rating Single-Layer Pyrovatex Construction TPP Rating of 11 Fresh, Stylish Design Black Wrist and Ankle Cuffs Black Epaulets, Belt, and High Back Collar Contrasting Arm & Leg Stripes Internal Bag Pockets Two-way Brass YKK Zipper Two-Piece Adjustable Belt Pleated Back Panel for Flexibility Colors are Black, Red, and Blue Sizes Small - 5X-Large Fo...

" Black Race-Quip Latch & Link 5-point pull-down harness Features double adjustable lap, shoulder and sub belts for ease of installation and adjustment. Bbelts can be mounted by wrapping them around the roll cage bars or bolting them in using the supplied hardware. All Race-Quip belts are made with forged steel hardware and premium quality 3 webbing. Belts are pattern sewn for uniform stitch le...

I have a really nice set of BROOKS-65 aluminum BBC rods these rods look like they never been in a motor I was told they where 6.385 $350 or trade for SBC of BBC part's I have more pics on my phone 1479-879-0076. Fayetteville, AR 72701 (479) 879-0076

I have a brand new set of FORGED 11.5 to 1 Pistons for a STD 454 my loss is your gain these cost over $300 when I bought them I have more pics on my phone 1-479-879-0076 always open to trades. Fayetteville, AR 72701 (479) 879-0076

16x16 Centerline Convo Pro Drag Racing Wheels Non Bead Lock (5 x 5 bolt pattern) - these are ultra lightweight and strong drag wheels. Used but in great condition. Just re-polished. New Goodyear D1230 slicks mounted on the Convo Pro wheels. 36x17x16 slicks. Zero miles or passes on them. Just mounted on the wheels. No tubes $1600 for the set of tires and wheels. Will ship via freight only - busi...

Never used. Just needs a fast polish. $60 shipped in the states

Condition: New Wire Starter to Solenoid Steyr Puch Pinzgauer 712 109 6000 Bosch 1 007 011 520 This is a Bosch Part inkFrog Analytics

Condition: New Brand: Bryke Racing Width: 29" Manufacturer Part Number: 130-000 Material: Fiberglass Auto Racing Part Type: Dash Gauge Panel Color: White Height: 7" UPC: Does Not Apply Gauge/Dash Panel Fiberglass Provides a professional look for both gauges and switch panels Width: 29" Height: 7" Depth: 11-1/2" Color: White Bryke Racing Part# 130-000 or (479) 824-0966 Check out our other eBay l...

Condition: New Brand: Bryke Racing Size: 8-3/4 Manufacturer Part Number: 320-105L-8-3/4 Side: Drivers side Placement on Vehicle: Left, Front Material: Steel Auto Racing Part Type: Upper Control Arm UPC: Does Not Apply Upper Control Arm Small Ball Joint for more clearance Low Friction 8-3/4" Measure from center of rod ends to center of ball joint 9-1/2" wide Includes (2) 1/2" Chrome moly rod end...

Condition: New Brand: Bryke Racing Length: 8-3/4" Manufacturer Part Number: 320-105-8-3/4x2 Side: Left & RIght Placement on Vehicle: Left, Right, Front Material: Steel UPC: Does Not Apply Upper Control Arm Small Ball Joint for more clearance Low Friction 8-3/4" Measure from center of rod ends to center of ball joint 9-1/2" wide Includes (4) 1/2" Chrome moly rod ends Includeds adjusters on both ...